Not too long ago, we saw a discussion about an article called “The 12 Best Tweeters (Reviews & Ultimate Buying Guide 2018).” Being curious, we decided to check the article out to see what criteria they used to choose the products and how they tested them. Much to our dismay, there were no criteria, nor was there any testing or a simple performance review. So, what was going on? Read on and we’ll explain why you should be wary of Top 10 lists.

Keep Your Story Straight

We’ve read hundreds, if not thousands, of product reviews in our decades in this industry. A member of the Best Car Audio staff used to review car audio products for one of the top mobile electronics magazines. We showed him the article above, and he’s still curled up in the fetal position, rocking back and forth, mumbling stuff about pink noise, microphones and distortion.

In a formal product review, the goal is to explain the features and benefits of a product. In the case of a tweeter, a review would include a detailed explanation of the product design, an explanation of the materials used to build the device, lab-based measurements of the output and a listening test. Of course, a summary of the key benefits and drawbacks of the design would give readers the opportunity to decide for themselves, based on their application and budget, if that product was suitable for their application.

In the article we were looking at, the only “review” was a restating of the product features from Amazon.com. Even when they did decide to get creative and provide some insight into the “quality” of the design, their comments conflicted with the ranking of the products. The number two product included a comment of “The materials used in construction are not so great,” and the number three offered “With the silk dome and metal construction od the speaker it is not the most advanced product on the market.” Yes, there is a typo in the text.

Wait, isn’t this the Top 12 tweeters? Why choose to rank products number two and three if there are better solutions available?

What is Clickbait?

The formal definition of clickbait is content or a title that encourages visitors to click on a link to a particular page or video. A few examples would be “How to get free beer” or “You won’t believe how great these speakers sound.”

Of course, anyone who writes articles wants people to read them, and at times, a little creative license or enthusiasm is OK to draw attention to the work.

In the case of the Top 12 tweeter article, and all the other articles on that website, all you are getting is a list. Yes, they have put some effort into compiling the list, writing somewhat useless text and stealing photos from manufacturer websites (yeah, you can’t just take those and do whatever you want with them). Using the “Top 5,” “Top 10,” “The Best” or any other type of clickbait title is designed purely to get you to read the article, even though the content doesn’t offer any quantification of the performance of value of the product.

So, Why Make a Top 10 List?

Now that you know what should be in a product review, or in this case, a product comparison, and clearly, that hasn’t been provided, why did they go to all the trouble of making the website and the article? The answer is to make money. You see, each product includes a link to “check the latest price on Amazon.” If you hover your mouse over the link, you’ll see that the website name is included as a tag in the link. This is called an associate link. If you follow the link and purchase the product, the website that provided the link gets a kickback from Amazon. Depending on the category, the kickback can be anywhere from 1 percent to 10 percent of the selling price. In terms of the website making money, it’s well worth the effort.

Why Do We Care?

When it comes to helping you choose the best possible products for your car audio system, the goal of a reputable specialist mobile electronics retailer is to quantify your goals, understand your application and then suggest a solution that will fulfill those requirements. Internet articles that purport to offer this information are doomed from the outset because they haven’t fulfilled the two most important tasks: qualification and application.

Imagine you are looking for a tweeter that will fit into the factory location in the doors of your Honda Civic. A large bullet tweeter simply won’t fit. Conversely, in a scenario where you have a wall of subwoofers in the back of your SUV and you want a dozen tweeters to mount around them, a reputable retailer might not suggest a small silk-dome solution. The “best” tweeter is the one that fits in your application, sounds the way you want and works with your budget.

Rather than waste time with clickbait articles that lack any substance, the next time you want to upgrade the sound system in your vehicle, drop by your local specialist mobile electronics retailer and ask them for some help. They will likely have products on display for you to audition and may even have a demo vehicle to check out. Most importantly, they are there to make sure you get the right solution and to install and configure it to provide the best performance possible.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

As we move toward the end of our discussion of car audio electrical theory, we need to talk about capacitance and inductance and how the characteristics of those phenomena interact with AC and DC signals. There’s no doubt that these are advanced concepts, but even a basic understanding of how capacitors and inductors work is fundamental to a thorough understanding of mobile electronics systems.

What Is a Capacitor?

A capacitor is a two-terminal electronic component that stores energy. Capacitors are made of two metallic plates that are separated by an electrical insulator. When we apply a voltage to one terminal of the capacitor, the electrons on one plate will impose a force on the opposite plate to create an opposite charge. The result is that the plates have equal and opposite charges and thus, maintain an electric field. Because the plates in a capacitor are very close together, they can store a large amount of energy for their overall size.

Capacitors are quantified in units of farads. A farad is defined as one coulomb of charge on each plate, resulting in a voltage of one volt across the terminals.

Capacitors in DC Circuits

Capacitors are, at their most basic function, a device that stores a microscopic magnetic field between its plates. When we apply a DC voltage to a discharged capacitor, it appears as a short circuit for an instant as the magnetic and electric fields start to form between its plates. As the capacitor starts to store energy, it increases in effective resistance, and the amount of current flowing through the device is reduced. Once the capacitor has equalized with the supply voltage, almost no current passes through the device.

When we remove the supply voltage from a capacitor, it will attempt to maintain the voltage across the terminals. It is this characteristic that makes capacitors an ideal solution to reduce variations in voltage. Capacitors resist changes in voltage.

Inside the amplifiers in our car audio systems, capacitors are used to store large amounts of energy at the rail voltage. When there is a sudden demand for current that exceeds the capability of the power supply, the capacitors will release energy to maintain their initial voltage. This characteristic helps to stabilize the voltage of the amp during dynamic transients. This same concept applies to “stiffening capacitors” used on the 12V feed to your amplifier. When implemented using high-quality components, the addition of a large capacitor can help to provide transient current to the amp.

The Capacitor in AC circuits

In alternating current circuits, capacitors take on an interesting phenomenon of “virtual resistance.” As we know, capacitors don’t like to change voltage, yet an AC signal is one that is defined as ever-changing. Depending on the relationship between the capacitor value and the frequency of the AC signal, some amount of the current is allowed to pass through the cap.

If we attempt to measure the resistance of a capacitor with a conventional multimeter, we’ll find it shows an extremely high value. For AC signals, we use the formula Xc = 1 / (2 x 3.1416 x F x C) to calculate the effective resistance, where F is the frequency of the signal and the C is the value of the capacitor in farads. Because this resistance is not present in DC signals, we call it capacitive reactance.

If we wanted to create a simple filter circuit to limit the amount of low-frequency signal going to a speaker, we could wire a non-polarized capacitor in series with the speaker. To calculate the frequency at which the cap starts to reduce bass going to the speaker, we can rearrange the above equation to F = 1 / (2 x 3.1416 x R x C), where R is the same value as the speaker resistance. For a four-ohm speaker and a capacitor with a value of 200 uF (microfarads), we get a frequency of 198.9 Hz. At this frequency, the capacitor appears to have the same reactance as the speaker, and the signal that is going to the speaker is reduced by 50 percent. Because capacitance is inversely proportional to frequency, the impedance of the capacitor increases as frequency decreases. At 99 Hz, the reactance is 8 ohms, at 50 Hz, it’s 16 ohms, and so on. This phenomenon simultaneously reduces the current supplied by the amplifier and acts as a voltage divider between the cap and the speaker.

A capacitor in series with a speaker is known as a first-order high-pass filter. It reduces the output of the speaker at a rate of -6dB per octave as you move away from the crossover frequency as defined above. Capacitors are suitable as filters for midrange and high-frequency drivers in passive designs and as protection devices for tweeters in active designs.

What Is an Inductor?

In the simplest of terms, an inductor is a coil of wire that creates a magnetic field based on the amount of current flowing through it. Many inductors feature iron cores to increase the intensity of the magnetic field. Where a capacitor resists changes in voltage, an inductor resists changes in current flow. We know from our previous article on magnetism that current flowing through a conductor creates a magnetic field around that conductor. If we wrap the conductor in a loop, the proximity of the loops to one another intensifies the magnetic field.

Also from our previous article, we also know that a magnetic field can impose a voltage on a conductor. If the current in an inductor tries to change, the magnetic field attempts to create a voltage across the device to maintain the current flow.

A good analogy for an inductor is a flywheel on a motor. Once you have established a specific rotational speed, it takes a large amount of work to increase or decrease its speed. Inductors work the same way with current. They resist changes in current flow. Inductors are rated using the unit henry (H). A henry is defined as the opposition to electrical current flow through a device that results in one volt of electromotive force to appear across the terminals.

Inductors in Electrical Circuits

In most applications, we don’t want inductors in a 12V DC circuit because they resist changes in current flow. For a variable load such as an amplifier, a large amount of inductance in the supply wiring would result in an unstable supply voltage as the current requirements change.

There are some cases where inductors are used in combination with a capacitor to act as a noise filter.

In an AC circuit, inductors allow low-frequency signals to pass through the device with little to no effect. If we wire an inductor in series with a speaker, it acts as a high-pass filter. Unlike a capacitor, in a DC circuit, an inductor appears as a short circuit with very little resistance. To an AC signal, we can calculate the reactive inductance of a capacitor using the equation Xl = 1 x 3.1416 x F x L, where F is frequency and L is inductance in henries.

If we want to use an inductor as a high-pass filter, we can determine the effective crossover point by swapping the Xl for the resistance of the speaker. In this example, we’ll use an inductor with a value of 6 mH (millihenries) and a speaker with a nominal impedance of 4 ohms. There, the -3dB point of the filter circuit would be F = 4 / (2 x 3.1416 x 0.006), or 106.1 Hz. This value of inductor would make a good low-pass filter for a woofer. Just as with a capacitor in series with a speaker, an inductor acts as a first-order filter and reduces output at a rate of -12dB per octave as frequency increases from the crossover point.

Other Cases of Inductance and Capacitance

Anytime two conductors are parallel to each other and in close proximity, there will some level of capacitance. Many overly exuberant enthusiasts talk about capacitance in interconnect cables. While this is a factor, the microscopic changes (if indeed any are perceptible) can be compensated for during the tuning process of the system. When it comes to buying high-quality interconnects, noise rejection and overall design durability should be your top goals.

The voice coil winding in the speakers we use has a certain amount of inductance. This characteristic reduces high-frequency output by reducing current flow at high frequencies. Because speakers are dynamic, their parameters change as the speaker cone moves. In the same way that having an iron core in an inductor increases inductance as compared to an air-core design, the inductance of a speaker voice coil increases when the cone assembly moves rearward into the basket. The T-yoke in the center of the speaker increases the strength of the magnetic field created by the current in the voice coil. Likewise, as the speaker moves forward, the inductance decreases. These position-based inductance distortions can cause a high-frequency warbling effect that can be detrimental to the reproduction of your music. One solution is to implement an under-hung voice coil design where the gap is taller than the coil winding. The drawback to this design is that the voice coil is often small and lacks power handling. Another option is to include a copper pole piece cap to reduce the magnetic field and minimize distortion. A copper cap is an expensive option but offers excellent performance benefits.

Car Audio Electrical Theory

For now, this is the end of our series of articles on car audio electrical theory. We hope you’ve enjoyed learning about the physics behind how your car audio system works. Our goal is to educate enthusiasts so that they can make educated purchases and upgrades to their mobile sound system. If you have any questions, drop by your local mobile electronic specialist retailer. They can help you design an upgrade that will truly transform your commute into an enjoyable listening experience.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Furthering our discussion about car audio electrical theory brings us to a discussion of how the flow of electricity through a conductor creates magnetic fields around the conductor. Understanding the relationship between current flow and magnetism is crucial to understanding how a speaker works.

History of Electromagnetism

The first documented correlation between electricity and magnetism came from Gian Domenico Romagnosi, a 19^th-century Italian legal scholar who noticed that a magnetized needle moved in the presence of a voltaic pile (the predecessor to a battery). Hans Christian Ørsted observed a similar occurrence in April 1820. He was setting up materials for an evening lecture and noticed that a compass needle changed directions when he connected a battery to a circuit. Neither Romagnosi nor Ørsted could explain the phenomenon, but they knew there was a defined relationship.

In 1873, James Clark Maxwell released a publication titled A Treatise on Electricity and Magnetism, which explained the presence of four effects:

1. Electric charges attract or repel one another with a force inversely proportional to the square of the distance between them: Unlike charges attract, like ones repel.
2. Magnetic poles (or states of polarization at individual points) attract or repel one another in a manner similar to positive and negative charges and always exist as pairs: Every north pole is yoked to a south pole.
3. An electric current inside a wire creates a corresponding circumferential magnetic field outside the wire. Its direction (clockwise or counter-clockwise) depends on the direction of the current in the wire.
4. A current is induced in a loop of wire when it is moved toward or away from a magnetic field, or a magnet is moved toward or away from it; the direction of current depends on that of the movement.

What Causes a Magnetic Field when Electricity Flows?

Electricity is the movement of electrons into and out of a conductor. One electron enters the end of a conductor, bumps into another electron, and so on until a different electron leaves the other end of the conductor and enters the load.

Because there are effectively more electrons in the conductor when current is flowing, the balance of negatively charged electrons to positively charged ions is upset and thus causes an imbalance in the magnetic field around the conductor.

We could devote thousands of words to explaining how atoms work. But in short, the core of an atom has a core of positively charged protons with a bunch of negatively charged electrons circling this core. When there is no flow of current, an atom doesn’t have a magnetic field because the quantity and path of the electrons around the protons are balanced. When we bump an electron out of an atom and into another, the atoms become imbalanced and thus produce a net magnetic field.

An Explanation On a Larger Scale

When electricity flows from the positive terminal of a battery to the negative, a magnetic field is created around the conductor. If you look at the image below, you will see the direction of the magnetic field relative to the flow of power.

In schools, this is often referred to as the right-hand rule. If you wrap your right hand around a conductor with your thumb extended upward in the direction of current flow (putting positive below your hand and negative above), your fingers point in the direction of the magnetic field.

Keep in mind that for audio signals, the polarity of the current changes from positive to negative in the same way that the vibrations produced by someone talking or playing an instrument pressurize and rarefy the air to produce sound.

How Magnetism Makes a Speaker Work

Conventional moving coil loudspeakers use a coil of wire (called a voice coil) and a fixed magnet. The electricity from the amplifier flows through the voice coil and creates a magnetic field. The polarity of the magnetic field pulls the voice inward or pushes it out in an amount proportional to the strength of the magnetic field.

The diagram below shows the force exerted on the voice coil with the current flowing through the positive half of the audio waveform.

This diagram shows the force exerted on the voice coil with the current flowing through the negative half of the audio waveform.

As the polarity of the current reverses, so too does the force exerted on the voice coil, which is attached to the speaker cone through the voice coil former.

Magnetism Isn’t Always Beneficial

Regarding speakers, we rely on and need magnetic fields for them to work. With that said, magnetism doesn’t always work in our favor.

If there is a large amount of current flowing through a conductor, there will be a strong magnetic field around that conductor. If we place another conductor in that magnetic field, a voltage will be produced across the second piece of wire.

In our vehicles, many devices such as fans, sensors, the alternator, lighting control modules and computers create magnetic fields containing high-frequency noise. When an improperly shielded interconnect passes through one of these fields, it can pick up that noise and produce a voltage on the conductor. This phenomenon is why it’s important for your installer to run the interconnect cables and often the speaker wires in your car away from sources of electrical noise.

Consult Your Local Mobile Electronic Installation Experts

When it’s time to upgrade the sound system in your vehicle, visit your local specialized mobile enhancement retailer. They have the training and experience to ensure your new audio system will sound great and be free of unwanted noise!

In our next article, we are going to talk about inductance and capacitance and how those characteristics affect high-frequency electrical signals.
This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.