Auto Acoustics

Car Stereo and Window Tint

(919) 493-5473 (336) 585-0188
  • Home
  • Services
    • ATV/UTV Upgrades
    • Car Audio
    • Driver Safety
    • Jeep Accessories
    • Marine Audio and Lighting
    • Motorcycle Audio
    • Remote Starters
    • Truck Accessories
    • Window Tint
  • About Us
  • Location
  • Customer Reviews
    • Durham Store
    • Burlington Store
  • Contact Us
  • Work For Us
  • Facebook
  • Instagram
You are here: Home / Car Audio / Why Can’t I Turn the Volume on My Factory Radio All the Way Up?

Why Can’t I Turn the Volume on My Factory Radio All the Way Up?

Radio Volume

Whether the sound system in your car or truck is bone stock or upgraded with premium amplifiers, speakers and subwoofers, the system’s maximum volume may not directly coincide with turning the knob up all the way. The short and sweet of why this happens is something called gain overlap. This conscious and deliberate design decision ensures that any signal source can be played at the maximum volume level as determined by the system’s amplifiers. Are you confused? Fear not! As always, we’ll explain.

What Determines How Loudly a Car Stereo Can Play?

Radio VolumeIn most cases, the maximum output capability of your car stereo is determined by the power available from the amplifiers to drive the speakers. When you run out of power, the signal produced by the amp distorts heavily, and the sound becomes garbled and unpleasant.

In some systems, the limiting factor may be the quality or configuration of the speakers used in the vehicle. If the speakers aren’t operating in their optimal range, you may hear a snapping sound as the voice coil former smashes into the back plate. This is a rare occurrence but it does happen.

Audio System Gain Structure

Radio VolumeWhen you have an amplifier connected to a radio, most people think that the installer (or system designer, in the case of a factory-installed sound system) should configure the amplifier so that it makes full power when you crank the volume to its highest setting. This simple 1:1 ratio works great for music that is recorded loudly.

There is a significant drawback to this configuration. What happens when you have an audio source that is quiet? A good example of this is the release of the Dire Straits’ 2005 album, Brothers in Arms. This (admittedly amazing) album is recorded with a wide dynamic range and a relatively low average volume level. Scientifically speaking, the track “Money for Nothing” has an average amplitude of -22 dBFS (decibels referenced to the maximum recording level), even if the peaks are recorded at the maximum allowable level on the CD. By comparison, the Daft Punk track “Give Life Back to Music” has an average level of -17dBFS. You need about five dB more gain in your system to make Mark Knopfler and Company appear to be performing at the same average volume level.

What Happens When Full Volume Isn’t Enough?

Radio VolumeAudio system designers include something called gain overlap in the system to allow these quiet musical passages to be played at the same level as tracks that are recorded loudly. The drawback of this (very common) feature is that your system will distort heavily if you play loudly recorded music at full volume.

In these situations, the person operating the sound system (you) needs to know when you have maxed out the capabilities of your amplifier and stop turning the volume up. Many mobile electronics specialist retailers will tell you that a volume setting of 27 out of 30 may be as high as you can turn up the system. This limit is determined using test tones recorded at high volume levels. Following this guideline ensures that your system will never distort. With that said, if you have selected a source that isn’t as loud, whether it’s Bluetooth, files on a USB stick, a quiet compact disc or the 1/8-inch auxiliary input, having a few notches left over to turn the volume up a little higher is very welcome.

What Happens When You Exceed Maximum Volume?

Radio VolumeAs we mentioned at the beginning of this article, in most cases, audio systems are limited by the power available from the system amplifiers. When you reach this limit, the amp will “clip.” Clipping adds large quantities of harmonic distortion to the output signal and dramatically increases the energy delivered to high-frequency speakers. This extra energy can cause mids and tweeters to fail prematurely.

If your upgraded audio system is configured to include some amount of gain overlap, work with the person who tuned the system to understand its limits. You are getting all the performance possible from your audio system, even if the volume on the radio isn’t at full. Your local mobile enhancement retailer can provide specifics about the limits of your factory source unit and explain how they can improve the detail, accuracy and emotional impact of your car stereo system.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Share this:

  • Click to email a link to a friend (Opens in new window) Email
  • Click to share on Facebook (Opens in new window) Facebook
  • Click to share on X (Opens in new window) X
  • Click to share on Pinterest (Opens in new window) Pinterest

Related

Filed Under: ARTICLES, Car Audio, RESOURCE LIBRARY

About BestCarAudio.com

BestCarAudio.com is a showcase for the very best mobile electronics retailers in the world and a place to educate and inform interested consumers about existing and emerging technologies.

Recent Articles

Amplifier Input Controls

How Does a Car Audio Amplifier Work? – The Input Stage

May 18, 2025 

It’s time to look at the input stage of how a modern car audio amplifier works. The input stage is responsible for interfacing with your radio and provides features like the gain … [Read More...]

Turn-the-volume-up

Why Can’t I Turn the Volume on My Factory Radio All the Way Up?

May 4, 2025 

Whether the sound system in your car or truck is bone stock or upgraded with premium amplifiers, speakers and subwoofers, the system’s maximum volume may not directly coincide with … [Read More...]

Headunit Features

How Does a Car Audio Amplifier Work – The Power Supply

April 20, 2025 

We’ve talked about car audio amplifier features and specifications at great length, but up to this point, we haven’t discussed how a car audio amplifier works. In this article, … [Read More...]

Audio Distortion

Understanding Specifications: Car Audio Amplifier Distortion

April 6, 2025 

As we slowly approach the end of our latest Understanding Specifications series, we want to take a look at car audio amplifier distortion ratings and explain what they mean. We … [Read More...]

SystemTuning

Why Car Audio System Setup and Tuning Are Important

March 23, 2025 

Unlike buying and setting up a basic home audio system, having a new amplifier and speakers installed in your car or truck requires proper setup and tuning. At home, you can adjust … [Read More...]

Subscribe!

Enter your email address to subscribe to our website and receive notifications of new posts by email.

Join 32 other subscribers

Customer Reviews

Subscribe to Our Website

Enter your email address to subscribe to our website and receive notifications of new posts by email.

Durham Location


Get directions to Auto Acoustics

Services

  • Car Audio
  • Driver Safety
  • Motorcycle Audio
  • Remote Starters
  • Truck Accessories
  • Window Tint

Connect With Us

  • Facebook
  • Instagram

Copyright © 2025 Auto Acoustics · Privacy Policy · Website by 1sixty8 media, inc. · Log in

 

Loading Comments...